Investigate the effects of global warming on aquatic and marine life with this powerful tool!
This unique line of safe, adaptable aquatic habitats creates advanced environmental simulations.
We are proud to present the Multi-stressor units. This leading-edge family of our Multi-tank systems incorporates an array of environmental controls (photoperiod, pH, temperature, dissolved oxygen, and salinity) “à la carte”. By associating a unit with specific controls, you can customize your own multi-parameter fish habitat.
These polyvalent instruments are the outcome of over 10 years of research and development at Aquabiotech’s headquarters in Quebec, Canada. When flexibility and reliability really count, Aquabiotech’s innovative solutions combining highly dynamic possibilities are sure to meet your exact demands every time.
Modes of Control
Passive control is done without the use of probes or electronic control. Maintaining pH via the dissolution of calcium rocks is an example of passive control.
The parameter drops or rises and stabilizes in a plateau for a given period of time. After this period, the parameter increases or decreases automatically at the same rate to reach and maintain a second plateau. The cycle repeats itself.
To set in a cyclic fluctuation, the operator enters:
- -The first level wanted
- -Time to reach and maintain that level
- -The second level wanted
- -Time to reach and maintain that level
Dynamic control over the drop and rise phases of the cycle can be incorporated by setting a given rate (ex: 1.0°C/h). Otherwise, the rise and drop occur as fast as the system can go.
A Multi-stressor unit can actively control several parameters simultaneously. Generally, when one parameter is going through fluctuations, the other parameters are kept stable (static).
For instance, the natural photoperiod of the northern hemisphere can be simulated, while pH is kept at 7.6, dissolved oxygen at 70% saturation, and temperature fluctuating in cycles between 5 and 7°C in 24-hour periods.
Due to chemical or gas interferences, some parameters cannot be precisely controlled simultaneously. The table below illustrates the suitable parameters mix.
The level of dissolved oxygen can fluctuate between normoxia and hypoxia in a multi-stressor unit. Hypoxia conditions are created with a mix of nitrogen gas and air. The purity of nitrogen plays an important role on the level of hypoxia obtained and the rate of drop.
Static control: Precision: ± 0.1 mg/L – Water 100% recycled.
Dynamic control: Precision: ± 0.1 mg/L – Water 100% recycled.
Cyclic fluctuations: Precision: ± 0.1 mg/L – Water 100% recycled.
Seasonal cyclic fluctuations are obtained The lowest and highest levels wanted are manually slightly modified every 1-3 weeks.
Static, dynamic and cyclic control of water temperature control (± 0.3 °C)
• Includes salinity-resistant temperature probe, quiet chilling compressor with titanium heat exchanger, water heater, and controls.
• Insulated units: 4-35°C (room temperature at 20°C)
• Non-insulated units: 10-35°C (room temperature at 20°C)
For water temperatures ranging from 5-35°C, racks are enclosed with insulated panels, reducing chilling requirements, operating costs, and condensation. Plus, the covered habitat eases photoperiod control with light ramping. Colder temperatures are available.
Currently, only the static control of salinity is offered and done by the Enviro-Monitron via the controlled inflow of concentrated seawater (e.g. 50 PSU) and freshwater.
Currently, only the static control of pH is being offered. However, the means of controlling it is optional. pH can be reduced via the direct injection of CO2 gas, or of CO2 -saturated water.
It is raised via the controlled injection of a weak base. You can choose between the means of dropping pH and may incorporate the rise of pH as well.
Reduces light stress and allows for complete photoperiod manipulations.
Photoperiod control is often integrated to better mimic the natural environment: light emitting diodes (LED) over each shelf. They can modulate light intensity, recreating dawn and dusk and natural circadian rhythms.
The photoperiod cycles are controlled by the Tide Monitron, featuring:
LIGHT DIMMING – The Enviro-Monitron controls each VDC light circuit, modulating light intensity above the shelf. Sunrise and sunset are simulated, creating a more natural environment. The gentle light ramping generated significantly reduces light stress created by the sudden turning on/off of lights.
ASTRAL CYCLE – Fixed L/D cycles or natural circadian rhythms can be created with the Tide Monitron. Therefore, for any geographical position (longitude, latitude) and date you enter, a natural photoperiod is created with increasing day length in spring, for instance. Photoperiod cycles of any part of the world can be simulated.
Change season length
The photoperiod controller can increase or shorten seasons, and modify the duration of the year. For example, a year can be made with a short winter followed by a long spring. Ideal for breeding control!
Many options are available for conducting a wide range of experimentation, making your Multi-stressor unit a flexible product to meet not only your current needs but also for the future.
Large fish or large crustaceans may not fit into 9-L tanks. Some researchers have replaced their 9-L tanks with their own larger tanks on their Multi-stressor units (e.g. with 20-30- L tanks). Keep in mind that the factory-built flow rate to the habitat will be appropriate for these larger tanks as well as the water filtration system. If they are not self-cleaning, siphoning the tanks occasionally should be required. The filtration system may also need more frequent cleaning if the recommended feed rate for the unit is exceeded.
Should you wish larger tanks incorporated in the system at delivery, simply let us know. We’ll be happy to select basins that fit your application.
Another option for large fish is to purchase one or more self-contained water recycling with biofiltration (REBF) systems of larger biomass capacity. We will link them to larger tanks. The wanted controls will then be integrated ‘à la carte’ into the REBF system. As a result, you may obtain a system like this one with 4 x 70-L tanks.
Insulated panels are optional with integrated photoperiod control. They can be omitted in warmer water. Our experience indicates that insulation is not required when the coldest water temperature is 15°C and the ambient air temperature is 25°C or less.
Photoperiod control is also available for larger tanks. LEDs are simply inserted in opaque lids and connected to the Enviro-Monitron.
To create hypoxic conditions down to 2 mg/L DO, nitrogen gas with a purity of 99% or more is recommended. We provide nitrogen generator tailored to your Multi-stressor units.
State-of-the-art membrane separation technology produces dry nitrogen up to 99% pure.
Provides control over the rate and purity of nitrogen gas production (up to 13.8 SCFH at 99% purity). The generator may operate at pressure rating from 90-150 psi for 95-99% purity. It requires oil-free and water-free air.
The generator will be connected to the DO control system of up to three Multi-stressor units, which will automatically adjust the flow of air, oxygen and nitrogen gas. The operation is always quality-tested in Coaticook, Quebec, Canada before delivery.
Some applications ask for 100% or supersaturated water with oxygen gas. In this case, an oxygen generator is included as an option.
In this custom-design system, water temperature drop to 1°C ± 0.3°C (room temperature at 20°C or less). To achieve this goal, we use a central glycol refrigeration system maintained at -4 ° C.
We also custom-build glycol chilled systems, chilling and heating water at a very high rate (10°C/h).
Each Multi-stressor unit is custom-built with high-quality materials and a specific mix of software and precision equipment for achieving your application. Up to three Multi-stressor units per rack. All systems are mounted on high-strength fiberglass and plastic stands with built-in Microban® antimicrobial protection. It protects the shelf mats from bacteria, mold, mildew, and fungi that cause odors, stains, and product degradation.
CSA-approved control panel
- NEMA 4X enclosure for humid environments
- Automatically starts back-up pump (fish habitat)
- Automatic on/off switch with overload for critical components
- Quick plug IP68 connectors for each device
Water recycling & control module
- Includes quiet pumps and chiller
- Quality-selected water filtration equipment operating with a dedicated pump
- Precision hardware for each environmental control
- Biofilter pre-activated with live nitrifying bacteria before delivery
- Automatically controls the make-up water flow
- Operates on its own: water recycling pump
- Insulation panels are standard for cold water operation (≤15°C) with
independent photoperiod simulation
- Flow rate to habitat is adjustable
Each Multi-stressor is associated with an Enviro-Monitron™. The Enviro-Monitron™ provides intelligence, converting data from probes into a command. The CSA-certified control panel dispatches these orders.
Every control option was carefully programmed and tested. An array of control and monitoring options are available. Some controls are optional, while others are already included. Monitron’s capabilities included by default in each Multi-stressor unit:
- -Automatic control of make-up water inlet: Between 0-100% of total volume replacement per day
- -Complete temperature options: Static, dynamic, and cyclic
- -Automatic start-up of backup pump in case of flow interruption; alarm in fish habitat keeps water flowing to rearing tanks in case of pump failure
- -Automatic interruption of heating and cooling in case of flow interruption in the filtration module alarm—protects chiller and heater
Since Multi-stressor systems are designed for closed-circuit operation, no more than 5-10% of the rearing tanks volume needs to be replaced every day. The operating costs for heating, chilling, or applying any controls in a recirculating aquaculture system (RAS) are therefore considerably reduced.
The water renewal rate is automatic and adjustable.
The water filtration module includes all the necessary stages for closed-circuit operation: pre-activated biofilter, 20 microns solid filtration, carbonate stones for passive pH control, activated carbon, degassing, and aeration.
Multi-stressor systems can be fed fresh or seawater, diluted toxicant, or distilled water.
All fish tanks within a same Multi-stressor unit share the same water and are exposed to the same environmental and experimental conditions. Compact, a rack can hold from one to three Multi-stressor units.
Rearing tanks: The rearing tanks are self-cleaning polycarbonate tanks (1, 3, or 9-L) with a lid, baffle, and screen. A swift water exchange carries food particles, keeping them self-cleaning. It also keeps environmental parameters stable within individual tanks. For more flexibility, flow rate to rearing tanks can be adjusted by the operator.
A multi-stressor unit contains: 6 x 9-L, 12 x 3-L or 14 x 1.5-L tanks.
All tanks within and between units are interchangeable.
Food-approved shelving: Shelving is made of seawater-resistant plastic, NSA-approved for direct contact with food, and does not leach any chemicals. Thanks to the unique Microban® protection, an antibacterial & mould resistant built-in agent.
Aquabiotech’s equipment comes with highly professional service.
Customer oriented, our sales team is dedicated to walking you through each step into designing the right system for your needs.
Take advantage of our free quote preparation service to facilitate access to government research funding.